11 KW Shot Blasting Machine Cleaning Surfaces Of Casting / Forging
Description:
shot blasting machine applies to cleaning the surfaces of casting, forging, steel structure, car wheels and working piece.
This single-hook shot blasting machine applies to cleaning the surfaces of casting, forging, steel structure, car wheels and colored metal workpieces etc. The machine mainly make use of the high-speed pill quantity that the high-efficiency mighty throwing the pills machine throws. Throwing and beating the surface and inner part of the circumgyrating workpieces, to clean the other viscous sand, rust layer, solder residues, oxide husk and etc, then the surface will be subtle and glabrous. It also can enhance the accreting power between the lacquer and the surface of the steel structures , at the same time, it can enhance the resist- fag intensity and resist- fretting ability, improve the steel structures inner quality and protract the using life-span.
Main specifications of Q3740 hook shot blasting machine
1.The max.size of workpieces to be cleaned
Diameter×height φ2000×2500 mm
2.Blasting units
Model Q034
Impeller diameter φ250 mm
Throw the pill quality 250kg/min
Power 11 kW
Quantity 4 sets
3.The need time of cleaning one hook
Casting 5-10min
Forging 10-15min
Aluminum alloy 5-8min
4.Elevator lifting power
Lifting power 60 t/h
The speed of the belt 1.2 m/s
Power 4 kW
5.Separator:
Separating quantity 60 t/h
The wind speed in the separating area 4-5 m/s
6.Spiral conveyor:
Transportation quantity 60 t/h
Power 2.2 kW *2
7.Hook structure:
Loading tonnage of the hook 3tx2
Engine Power 4.5 kWx2
Operating speed 20 m/min
Engine Power 0.4 kwx2
Rotating Power 0.75kw
8.Dust removal:
Fan power 15kw
Shaking power 0.55kw
Total efficiency 12000 m3/h
9.The whole power of the machine: about 78.5 Kw
10.The size of cleaning room length X width X height: 2500*2500*3000 (mm)
